I just completed a makeover — turning the old unit into a wood wrapped KALLAX. A little bit of glueing, staining and screwing and the old dresser has a new rustic look. 



Firstly, I have a really old KALLAX 2×2, rather it is an EXPEDIT.

KALLAX 2×2 unit | IKEA.com

It was used in different rooms the last couple of years and looked really worn already. (It had self-made wooden doors for the last few years).

Generally, KALLAX can be easily transformed, so I decided to renew it instead of throwing away.
Materials: KALLAX 2 x 2 unit Wood panels Thin plywood Stain Wood glue Furniture legs of your choice
I bought wooden panels and stain. The most expensive item were the furniture legs.

Related: KALLAX as a modern card catalog cabinet
DIY Wood wrapped KALLAX
First, I measured the outer dimensions of the KALLAX unit and cut the wood panels accordingly. For the top and bottom panels, be sure to add a margin to overlap the additional two side wood panels. Then sand the panels down, especially the rough edges.

I then measured the dimensions of the cube. A thin plywood was cut to create an overlay for the shelves. It’s a nice touch to tie in with the new look.

Next, I stained the pieces with wood stain. And let them dry thoroughly.

After that, I glued on the wood panels on the outside of the KALLAX. For added security, I added some screws piercing the wood through to the KALLAX.

Then, I glued on the interior pieces.

The last thing I did was fixed the new legs on to the base.

Quite simple to do once you have all your pieces cut. Now, my KALLAX / EXPEDIT will last me many more years to come.

~ by Martina from Austria

The post Dinged up KALLAX? Renew it wood wrapped style appeared first on IKEA Hackers.
#KALLAX #Bookcases&Shelving #Featured #Expedit
KALLAX Bookcases Featured Expedit